decoration process, the quality of WPC floor directly affects the living quality and integral beauty of the building.the check and accept standard of the WPC floor includes WPC floor color, WPC sound, WPC floor crimp and warping etc.

Above all, should check wether the WPC floor color is consistent

If the color difference is too big, directly affect the appearance, you can ask for replacement; If the color is too consistent, almost no color difference, it is necessary to check the floor pattern is the same.

Next, should check whether the WPC floor have sound

When checking and accepting, walk back and forth on the WPC floor, footstep must aggravate, especially pay attention to more check and accept the place rely on wall and door hole, if discover the place that has sound, need to walk around, find out the specific position of sound to make a mark. If this occurs, can ask to tear down and repave.The place that has sound that is caused that operation is not standard and use material unqualified by the construction personnel in construction process, .Operation is not standardized mainly reflected in the keel fixed is not firm; Material is not qualified mainly reflected in the keel without drying. Some decorate construction companies use the keel that does not have dry to carry out construction , the surface that it looks like it’s been dried, but it’s not.

Finally, should check the surface of the WPC floor whether to have eat by moth eye, aperture, Nick.

Common due to the keel is untreated, there is moth inside.Wait for discovery the eat by moth eye,WPC floor has almost been eaten by moth; Cracks and scratches are obvious. Specification stipulates: aperture of WPC floor should not be more than 0.5 mm;Scratches are mainly caused by rough decoration,if waxing still cannot repaires it, it must be changed.